D-Link DIR-820, User Manual

Page: 178 / 210

DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
In the opened window, you can specify the following parameters:
Parameter Description
Name
A name for the rule for easier identification. You can specify any
name.
Interface
From the drop-down list, select an interface (WAN connection)
through which remote access to the router will operate. Leave the
Automatic value to allow remote access to operate through all
created WAN connections.
IP version
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
Open access from any
external host
Move the switch to the right to allow access to the router for any
host. Upon that the
IP address and Mask fields are not displayed.
IP address
A host or a subnet to which the rule is applied. You can specify an
IPv4 or IPv6 address.
Mask
For the IPv4-based network only.
The mask of the subnet.
Public port
For the IPv4-based network only.
An external port of the router. You can specify only one port.
Protocol The protocol available for remote management of the router.
After specifying the needed parameters, click the
SAVE
button.
To set a schedule for the remote access rule, click the Set schedule icon ( ) in the line
corresponding to this rule. In the opened window, from the Rule drop-down list, select the Create
rule value to create a new schedule ( see the Schedule section, page 187) or select the Select an
existing one value to use the existing one. Existing schedules are displayed in the Rule name
drop-down list.
To enable the rule for remote access at the time specified in the schedule and disable it at the other
time, select the
Enable rule value from the Action drop-down list and click the SAVE button.
To disable the rule for remote access at the time specified in the schedule and enable it at the other
time, select the
Disable rule
value from the
Action
drop-down list and click the
SAVE
button.
To edit a rule for remote access, left-click the relevant rule. In the opened window, change the
needed parameters and click the
SAVE
button.
To change or delete the schedule for a rule, click the
Edit schedule
icon ( ) in the line
corresponding to this rule. In the opened window, change the parameters and click the SAVE
button or click the
DELETE FROM SCHEDULE
button.
Page 178 of 210