D-Link DIR-820, User Manual

Page: 111 / 210

DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
Parameter Description
Broadcast wireless
network
If the wireless network broadcasting is disabled, devices cannot
connect to the wireless network. Upon that DIR-820 can connect to
another access point as a wireless client.
To enable/disable broadcasting on a schedule, click the
Set
schedule icon ( ). In the opened window, from the Rule drop-
down list, select the Create rule value to create a new schedule
(see the Schedule section, page 187 ) or select the Select an
existing one value to use the existing one. Existing schedules are
displayed in the
Rule name
drop-down list.
To enable broadcasting at the time specified in the schedule and
disable it at the other time, select the
Enable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button. When the wireless connection is disabled, the device
will not be able to enable broadcasting of this wireless network on
schedule
.
To disable broadcasting at the time specified in the schedule and
enable it at the other time, select the
Disable wireless network
broadcasting
value from the
Action
drop-down list and click the
SAVE button.
To change or delete the schedule, click the
Edit schedule
icon
( ) . In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
If you created an additional network, you can configure, change or
delete a schedule for each network. To do this, click the icon in the
line of the network.
Clients isolation
Move the switch to the right to forbid wireless clients of this
wireless network to communicate to each other.
Enable guest network
This function is available for the additional network. Move the
switch to the right if you want the devices connected to the
additional network to be isolated from the devices and resources of
the router's LAN.
In the Security Settings section, you can change security settings of the wireless network.
By default, the WPA2-PSK network authentication type of both bands of the wireless network is
specified. WPS PIN from the barcode label is used as the network key.
Page 111 of 210