D-Link DIR-820 User Manual Download Page 14

Page: 14 / 210

DIR-820

AC1200 Wave 2 MU-MIMO Wi-Fi Router

User Manual

Overview

LED

Mode

Description

LAN 1-3

Solid green

A device (computer) is connected to the relevant port,
the connection is on.

Blinking green

Data transfer through the relevant LAN port.

No light

The cable is not connected to the relevant port.

WLAN 2.4G

WLAN 5G

Solid green

The router's WLAN of the relevant band is on.

Blinking green

Data transfer through the Wi-Fi network of the relevant
band.

No light

The router's WLAN of the relevant band is off.

WPS

Fast blinking green

Attempting to add a wireless device via the WPS
function.

Slow blinking green

The firmware is being updated.

No light

The WPS function is not in use.

In case the

Power

and

WLAN 5G

LEDs are solid green, and the

WAN

LAN 1-3

WLAN 2.4G

and

WPS

LEDs are fast blinking green at the same time, the device is in the emergency mode.

Power the device off and on. If the device is loaded in the emergency mode again, restore the
factory default settings via the hardware

WPS/RST

button.

Page

of 210

Summary of Contents for DIR-820



















































































































































































































Search results

Summary of Contents for DIR-820

Reviews:

Related manuals for DIR-820

Brands by name

Popular brands

D-Link DIR-820, User Manual

Search results

Summary of Contents for DIR-820

Reviews:

Related manuals for DIR-820

Brands by name

Popular brands