DIR-820
AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Action
Select an action for the rule.
•
Allow
: Allows packet transmission in accordance with the
criteria specified by the rule.
•
Deny
: Denies packet transmission in accordance with the
criteria specified by the rule.
Protocol
A protocol for network packet transmission. Select a value from the
drop-down list.
IP version
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
Direction
The direction of network packet transmission to which the rule will
be applied. Select the source of the packet direction from the
Source
drop-down list.
•
WAN
: The rule will be applied to the packets transmitted
from the external network.
•
LAN
: The rule will be applied to the packets transmitted
from the local network.
Select the destination of the packet direction from the
Destination
drop-down list.
•
Router
: The rule will be applied to the packets transmitted
to DIR-820.
•
WAN
: The rule will be applied to the packets transmitted to
the external network.
•
LAN
: The rule will be applied to the packets transmitted to
the local network.
From the
Source interface
and
Destination interface
drop-
down lists, select source and destination interfaces for which the rule
will be applied. Leave the
Auto
values to apply the rule to all
created WAN interfaces.
Source IP address
Set as
Select the needed value from the drop-down list.
Start IPv4 address /
Start IPv6 address
The source host start IPv4 or IPv6 address.
If it is necessary to specify a single address, leave the
End IPv4
address / End IPv6 address
field blank.
You can choose a device connected to the router's LAN at the
moment. To do this, select the relevant IPv4 or IPv6 address from
the drop-down list (the field will be filled in automatically).
Page
164
of 210