D-Link DIR-810L User Manual Download Page 7

Page: 7 / 169

D-Link DIR-810L User Manual

Section 1 - Product Overview

Network Requirements

• An Ethernet-based broadband modem

Web-based Configuration

Utility Requirements

Computer with the following:

• Windows®, Macintosh, or Linux-based operating system

• An installed Ethernet adapter or wireless adapter

Supported Browsers:

• Internet Explorer 7 or higher

• Firefox

• Safari 4 or higher

• Chrome

Windows

Users:

Make sure you have the latest version of Java

installed. Visit

www.java.com

to download the latest version.

mydlink Requirements

• iPhone/iPad/iPod Touch (iOS 3.0 or higher)

• Android device (1.6 or higher)

• Computer with the following browser requirements:

• Internet Explorer 7 or higher

• Firefox

• Safari 5 or higher

• Chrome

iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc.

System Requirements

Summary of Contents for DIR-810L










































































































































































Search results

Summary of Contents for DIR-810L

Reviews:

Related manuals for DIR-810L

Brands by name

Popular brands

D-Link DIR-810L, User Manual

Search results

Summary of Contents for DIR-810L

Reviews:

Related manuals for DIR-810L

Brands by name

Popular brands