104
D-Link DIR-810L User Manual
Section 3 - Configuration
This page displays the current information for the DIR-810L. It will display the LAN, WAN (Internet), and Wireless information.
If your Internet connection is set up for a Dynamic IP address then a
Release
button and a
Renew
button will be displayed.
Use
Release
to disconnect from your ISP and use
Renew
to connect to your ISP.
If your Internet connection is set up for PPPoE, a
Connect
button and a
Disconnect
button will be displayed. Use
Disconnect
to drop the PPPoE connection and use
Connect
to establish the PPPoE connection.
Displays the router’s time and firmware version.
Displays the MAC address and the public IP settings.
Displays the MAC address and the private (local) IP settings for the
router.
Displays the 2.4GHz wireless MAC address and your wireless settings
such as SSID and Channel.
Displays the 5GHz wireless MAC address and your wireless settings
such as SSID and Channel.
Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP address assigned by the router
(DHCP).
Displays IPv4 and IPv6 multicast group addresses.
General:
WAN:
LAN:
Wireless LAN:
Wireless LAN2:
LAN Computers:
IGMP Multicast
Memberships:
Device Info
Status
