D-Link DIR-645L User Manual Download

Page: 15 / 154

D-Link DIR-645L User Manual

Section 2 - Installation

4. Plug one end of the included Ethernet cable that came with your DIR-645L into the yellow port labeled INTERNET

on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.

5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.

6. Connect the supplied power adapter into the power port on the back of the router and then plug it into a power

outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the

router to boot up.

7. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online

already. Try opening a web browser and enter a web site. A solid green light indicates connection on the Internet

port and the router can connect to the Internet. If the LED is orange, there is a physical connection but the router

cannot communicate with the greater Internet.

USB

WPS

INTERNET

POWER

INTERNET

USB

WPS

INTERNET

POWER

INTERNET

DIR-645L

Modem

Computer

Modem

Computer

Summary of Contents for DIR-645L



























































































































































Search results

Summary of Contents for DIR-645L

Reviews:

Related manuals for DIR-645L

Brands by name

Popular brands

D-Link DIR-645L, User Manual

Search results

Summary of Contents for DIR-645L

Reviews:

Related manuals for DIR-645L

Brands by name

Popular brands