104
D-Link DIR-645L User Manual
Section 3 - Configuration
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Tools
Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
Enter a name for your router.
Enables a challenge-response test to require users to type letters or numbers
from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router’s network settings.
Check to enable HTTPS to connect to the router securely. This means to
connect to the router, you must enter
https://192.168.0.1
(for example)
instead of
http://192.168.0.1
.
Remote management allows the DIR-645L to be configured from the Internet
by a web browser. A username/password is still required to access the Web
Management interface.
The port number used to access the DIR-645L is used in the URL. Example:
http://x.x.x.x:8080
whereas x.x.x.x is the Internet IP address of the DIR-645L
and 8080 is the port used for the Web Management interface.
If you have enabled
HTTPS Server,
you must enter
https://
as part of the
URL to access the router remotely.
This section will list any rules that are created. You may click the
Edit
icon to
change the settings or enable/disable the rule, or click the
Delete
icon to
remove the rule.
Details
will display the current status.
Admin Password:
System Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Remote Admin
Inbound Filter:
