102
D-Link DIR-645L User Manual
Section 3 - Configuration
IPv6 Firewall
The DIR-645L’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device.
The DIR-645L’s IPv6 Firewall functions in a similar way to the IP Filters feature.
Check the box to enable the IPv6 firewall simple security.
Select an action from the drop-down menu.
Enter a name to identify the IPv6 firewall rule.
Use the drop-down menu to select the time schedule that the IPv6
Firewall Rule will be enabled on. The schedule may be set to
Always
,
which will allow the particular service to always be enabled. You can
create your own times in the
Tools
>
Schedules
section.
Use the
Interface
drop-down menu to specify the interface that
connects to the source IPv6 addresses of the firewall rule.
Enter the source IPv6 address range in the adjacent
IP Address
Range
field.
Use the
Interface
drop-down menu to specify the interface that
connects to the destination IP addresses of the firewall rule.
Select the protocol of the firewall port (
All
,
TCP
,
UDP
, or
ICMP
).
Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second
box.
Enable Checkbox:
Configure IPv6
Firewall:
Name:
Schedule:
Source:
IP Address Range:
Dest:
Protocol:
Port Range:
