D-Link DIR-645L User Manual Download

Page: 104 / 154

100

D-Link DIR-645L User Manual

Section 3 - Configuration

To use the Universal Plug and Play (UPnP

™

) feature click on

Enabled

. UPnP provides compatibility with networking

equipment, software and peripherals.

Checking the box will allow the DIR-645L to respond

to pings. Unchecking the box may provide some extra

security from hackers.

You may set the port speed of the Internet port to 10Mbps,

100Mbps, 1000Mbps, or Auto (recommended).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv4).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv6).

UPnP:

WAN Ping:

WAN Port Speed:

Enable IPV4

Multicast Streams:

Enable IPV6

Multicast Streams:

Advanced Network Settings

Summary of Contents for DIR-645L



























































































































































Search results

Summary of Contents for DIR-645L

Reviews:

Related manuals for DIR-645L

Brands by name

Popular brands

D-Link DIR-645L, User Manual

Search results

Summary of Contents for DIR-645L

Reviews:

Related manuals for DIR-645L

Brands by name

Popular brands