51
D-Link DIR-619L User Manual
Section 4 - Security
Configure WPA/WPA2-PSK
It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1.
Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on
Wireless
Setup
on the left side.
2.
Next to
Security Mode
, select
Enable WPA/WPA2 Wireless Security
(enhanced)
.
3.
Next to
Cipher Mode
, select
TKIP
,
AES
,
or
Both
.
4.
Next to
PSK/EAP
, select
PSK
.
5.
Next to
Network Key
, enter a key (passphrase). The key is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces.
Make sure you enter this key exactly the same on all other wireless clients.
6.
Click
Save Settings
to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity
until you enable WPA/WPA2-PSK on your adapter and enter the same passphrase as you did on the Router.
