D-Link DIR-619L User Manual Download Page 41

Page: 41 / 96

D-Link DIR-619L User Manual

Section 3 - Configuration

Firmware Update

Click the

Check Now

button (or the link at the top of

the window) to find out if there is an updated firmware;

if so, download the new firmware to your hard drive.

After you have downloaded the new firmware, click

Browse

in this window to locate the firmware update

on your hard drive. Click

Save Settings

to complete

the firmware upgrade.

Firmware

Upgrade:

Browse:

You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the

computer. Click on

Browse

to locate the firmware file to be used for the update. Please check the D-Link support site for firmware

updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.

DIR-619L

Summary of Contents for DIR-619L

































































































Search results

Summary of Contents for DIR-619L

Reviews:

Related manuals for DIR-619L

Brands by name

Popular brands

D-Link DIR-619L, User Manual

Search results

Summary of Contents for DIR-619L

Reviews:

Related manuals for DIR-619L

Brands by name

Popular brands