manualshive.com logo in svg

D-Link DIR-615 - Wireless N Router, User Manual

The D-Link DIR-615 - Wireless N Router is a high-performance device that provides fast and reliable wireless connectivity. To get started quickly, simply download the free Quick Installation Manual from manualshive.com, which gives you step-by-step instructions for setting up and optimizing your router.

Share
Download
background image

DIR-615

 Wireless N300 Router

User Manual

Configuring via Web-based Interface

Figure 69. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode.  

The 

Miscellaneous 

section.

Parameter

Description

Miscellaneous

Isolate connection

When the checkbox is selected, the router uses an alternate routing 
table for this connection. Select the checkbox only when your ISP 
requires this.

Enable RIP

Select the checkbox to allow using RIP for this connection.

NAT

Select the checkbox if you want one WAN IP address to be used for 
all computers of your LAN.

Firewall

Select the checkbox to enable protection against ARP and DDoS 
attacks.

Ping

Select the checkbox to allow the router to answer ping requests from 
the external network through this connection. For security reasons, 
it is recommended not to select this checkbox.

Click the 

Next

 button to continue.

After that the page displaying all specified settings opens. Click the  

Apply

  button to create the 

connection or the 

Back

 button to specify other settings.

After clicking the  

Apply

  button, the page for checking the Internet availability opens (see the 

Checking Internet Availability

 section, page 87).

Page 

86

 of 208

Summary of Contents for DIR-615 - Wireless N Router

















































































































































































































Reviews:

No comments

Related manuals for DIR-615 - Wireless N Router

3Com 3C3FE574BT Quick Start Manual preview
3C3FE574BT
Brand: 3Com Pages: 8
Tyco Electronics 8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink Product User Manual preview
8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink
Brand: Tyco Electronics Pages: 18
Octavo OSD3358-SM-RED Getting Started Manual preview
OSD3358-SM-RED
Brand: Octavo Pages: 28
Obihai OBi110 Quick Start Manual preview
OBi110
Brand: Obihai Pages: 2
Server Technology Sentry Global Security Modem Installation And Operation Manual preview
Sentry Global Security Modem
Brand: Server Technology Pages: 22
MC PCIe-DIO96H User Manual preview
PCIe-DIO96H
Brand: MC Pages: 21
ZALMAN CNPS11X Extreme User Manual preview
CNPS11X Extreme
Brand: ZALMAN Pages: 12
ZALMAN ZM-2HC2 User Manual preview
ZM-2HC2
Brand: ZALMAN Pages: 8
Aqua Computer Aquaduct 240 eco Operating And Assembly Manual preview
Aquaduct 240 eco
Brand: Aqua Computer Pages: 20
i-MO OptiBond 210 C Series Hardware Installation Manual preview
OptiBond 210 C Series
Brand: i-MO Pages: 16
XAVI Technologies Corp. X7822r User Manual preview
X7822r
Brand: XAVI Technologies Corp. Pages: 63
ZALMAN RESERATOR2 Installation And Operational Manual preview
RESERATOR2
Brand: ZALMAN Pages: 18
Procool SP480 Series Instructions preview
SP480 Series
Brand: Procool Pages: 2
Black Box Secure Site Manager 16 Quick Start Manual preview
Secure Site Manager 16
Brand: Black Box Pages: 16
Lattice Semiconductor LatticeMico GPIO Manual preview
LatticeMico GPIO
Brand: Lattice Semiconductor Pages: 28
Goobay 93122 User Manual preview
93122
Brand: Goobay Pages: 20
Ovislink Air Live GW-300R User Manual preview
Air Live GW-300R
Brand: Ovislink Pages: 20
SMC Networks EZ Switch SMC-EZ1024FDT Specification Sheet preview
EZ Switch SMC-EZ1024FDT
Brand: SMC Networks Pages: 4

Brands by name

Popular brands

Load more brands