D-Link DIR-505 User Manual Download Page 81

Page: 81 / 200

D-Link DIR-505 User Manual

Section 3 - Configuration

This page displays the current information for the DIR-505. It will display the LAN, WAN (Internet), and Wireless information. If

your Internet connection is set up for a Dynamic IP address then a

Release

button and a

Renew

button will be displayed. Use

Release

to disconnect from your ISP and use

Renew

to connect to your ISP.

If your Internet connection is set up for PPPoE, a

Connect

button and a

Disconnect

button will be displayed. Use

Disconnect

to drop the PPPoE connection and use

Connect

to establish the PPPoE connection.

Displays the router’s time and firmware version.

Displays the MAC address and the public IP settings for

the router.

Displays the MAC address and the private (local) IP settings

for the router.

Displays the wireless MAC address and your wireless

settings such as SSID and Channel.

Displays the LAN client info which connects to the router.

General:

WAN:

LAN:

Wireless LAN:

LAN Computer:

Device Info

Status

Summary of Contents for DIR-505









































































































































































































Search results

Summary of Contents for DIR-505

Reviews:

Related manuals for DIR-505

Brands by name

Popular brands

D-Link DIR-505, User Manual

Search results

Summary of Contents for DIR-505

Reviews:

Related manuals for DIR-505

Brands by name

Popular brands