42
D-Link DIR-456 User Manual
Section 3 - Configuration
WI-FI PROTECTED SETUP
Select this box to enable the WPS if
wireless devices you wish to include in
the local network support Wi-Fi Protected
Setup.
Only the “Admin” account can change
security settings.
Resets the PIN to the default number
shown on the device.
Generates a new PIN number for the
device.
Click
Connect your Wireless Device
to add wireless devices to the wireless
network.
Click
Save Settings
to save your changes, or click
Don’t Save Settings
to discard your changes.
Wi-Fi Protected Setup
Enable:
PIN Settings:
Reset PIN to
Default:
Generate New PIN:
Add Wireless
Station:
Wi-Fi Protected Setup (WPS) is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected
Setup in order to be configured by this method.
If the PIN changes, the new PIN will be used in following Wi-Fi Protected Setup process. Clicking on “Don’t Save Settings” will not reset
the PIN. However, if the new PIN is not saved, it will be lost when the device reboots or loses power.
