D-Link DIR-2055 User Manual Download Page 8

Page: 8 / 161

D-Link DIR-2055 User Manual

Section 1 - Product Overview

Hardware Overview

LED Indicators

Power

Solid Blue

The device is on and the system is healthy.

Solid Orange

The device is booting up or performing the factory reset process.

Blinking Orange The device is under recovery mode.

Internet

Solid Blue

The Internet port connection is established.

Solid Orange

The device cannot connect to the Internet.

Blinking Orange The device is undergoing the firmware upgrade process.

3 Wireless (2.4 GHz)

Blue

The 2.4 GHz wireless band is enabled.

Blinking Blue

The device is processing WPS.

Wireless (5 GHz)

Blue

The 5 GHz wireless band is enabled.

Blinking Blue

The device is processing WPS.

Summary of Contents for DIR-2055


































































































































































Search results

Summary of Contents for DIR-2055

Reviews:

Related manuals for DIR-2055

Brands by name

Popular brands

D-Link DIR-2055, User Manual

Search results

Summary of Contents for DIR-2055

Reviews:

Related manuals for DIR-2055

Brands by name

Popular brands