63
D-Link DIR-2055 User Manual
Section 3 - Configuration
2.4GHz / 5GHz - Advanced Settings...
Security Mode
Choose
None
or
WPA/WPA2-Personal
(recommended).
802.11 Mode (2.4GHz)
Select the desired wireless networking standards to use.
The available options for the 2.4 GHz wireless network are
Mixed 802.11b/g/n, Mixed 802.11g/n
, or
802.11n only
.
802.11 Mode (5GHz)
Select the desired wireless networking standards to use.
The available options for the 5 GHz wireless network are
Mixed 802.11a/n/ac, Mixed 802.11n/ac, Mixed 802.11a/n,
802.11ac only, Mixed 802.11a only,
or
802.11n only
.
Wi-Fi Channel
Select the desired channel. The default is
Auto
(recommended).
Transmission Power
Select the desired wireless transmission power.
Channel Width
(2.4GHz)
Select
Auto 20/40
if you are using both 802.11n and non-
802.11n devices, or select
20 MHz
if you are not using any
802.11n devices.
Channel Width (5GHz)
Select
Auto 20/40/80
if you are using 802.11ac, 802.11n, and
802.11a devices, select
Auto 20/40
if you are using 802.11n
and 802.11a devices, or select
20 MHz
if you are using 802.11a
devices.
HT20/40 Coexistence
(2.4GHz)
Enable or disable HT20/40 Coexistence.
Visibility Status
The default setting is
Visible
. Select
Invisible
if you do not
want to broadcast the SSID of your wireless network.
Schedule
Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable
, or you can create your own schedules in the
Schedules
section. Refer to
for more information.