D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print... Manual Download Page 29

Page: 29 / 155

Using the Configuration Menu

Home > VPN Settings > Tunnel > Method > IKE > Select IPSEC Proposal

IPSec Proposal
index

A list of selected proposal indexes from the IPSec proposal
pool listed below.

Proposal Name

DH Group

There are three groups that can be selected: group 1
(MODP768), group 2 (MODP1024), and group 5 (MODP1536).

Encap protocol

There are two protocols that can be selected: ESP and AH.

Encrypt algorithm

There are two algorithms that can be selected: 3DES and
DES.

This is the name used to classify the IPSec Proposal

Auth algorithm

There are two algorithms that can be selected: SHA1 and
MD5.

Summary of Contents for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...




























































































































































Search results

Summary of Contents for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Reviews:

Related manuals for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Brands by name

Popular brands

D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print..., Manual

Search results

Summary of Contents for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Reviews:

Related manuals for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Brands by name

Popular brands