D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print... Manual Download Page 27

Page: 27 / 155

Using the Configuration Menu

Home > VPN Settings > Tunnel > Method > IKE > Select IKE Proposal

IKE Proposal index

Proposal Name

DH Group

Encrypt algorithm

Auth algorithm

A list of selected proposal indexes from the IKE proposal pool
listed below.

There are three groups that can be selected: group 1
(MODP768), group 2 (MODP1024), and group 5 (MODP1536).

There are two algorithms that can be selected: 3DES and
DES.

There are two algorithms that can be selected: SHA1 and
MD5.

This is the name used to classify the IKE proposal.

Summary of Contents for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...




























































































































































Search results

Summary of Contents for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Reviews:

Related manuals for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Brands by name

Popular brands

D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print..., Manual

Search results

Summary of Contents for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Reviews:

Related manuals for DI-824VUP+ 2.4GHz Wireless VPN Router and Print...

Brands by name

Popular brands