D-Link DI-804 User Manual Download Page 30

Page: 30 / 75

General Setup

The

General Setup

screen enables you to configure general filtering

and logging settings for all users. You can Enable or Disable the

Call Filter

Data Filter

and set a specific

Start Filter Set

You can set the Log Flag to None, Pass, Block or No Match.

None

means that the log function is inactive.

Block

means that the log function

will record all blocked packets.

Pass

means that the log function will record

all passed packets.

No Match

means that the log function will record all

packets that are unmatched.

Note: When using Telnet, the filter log will be displayed if you type the

“log -f” command.

The

MAC Address for Packet Duplicate

log function can record the

logged packets via Ethernet. If you want to duplicate logged packets from

the router to another network device, you must enter the MAC Address

Summary of Contents for DI-804












































































Search results

Summary of Contents for DI-804

Reviews:

Related manuals for DI-804

Brands by name

Popular brands

D-Link DI-804, User Manual

Search results

Summary of Contents for DI-804

Reviews:

Related manuals for DI-804

Brands by name

Popular brands