background image

5

DI-724U User’s Manual 

D-Link Systems, Inc.

Introduction

Introduction

The  D-Link  DI-724U Wireless  108G  QoS  Router  is  an  802.11g  high-performance, 
wireless router that supports high-speed wireless networking at home, at work or in 
public places.  

Unlike most routers, the DI-724U provides data transfers at up to 108Mbps (compared 
to the standard 54Mbps) when used with other D-Link 

Air

Plus 

Xtreme G

 products. The 

802.11g standard is backwards compatible with 802.11b products. This means that you 
do not need to change your entire network to maintain connectivity. You may sacrifice 
some of 802.11g’s speed when you mix 802.11b and 802.11g devices, but you will not 
lose the ability to communicate when you incorporate the 802.11g standard into your 
802.11b network. You may choose to slowly change your network by gradually replacing 
the 802.11b devices with 802.11g devices .

In addition to offering faster data transfer speeds when used with other 802.11g products, 
the DI-724U has the newest, strongest, most advanced security features available today.  
When used with other 802.11g WPA  (WiFi Protected Access) and 802.1x compatible 
products in a network with a RADIUS server, the security features include:
WPA:   Wi-Fi Protected Access authorizes and identifies users based on a secret key 

that changes automatically at a regular interval. WPA uses TKIP (Temporal 
Key Integrity Protocol) to change the temporal key every 10,000 packets (a 
packet is a kind of message transmitted over a network.) This insures much 
greater security than the standard WEP security. (By contrast, the older WEP 
encryption required the keys to be changed manually.) 

802.1x:  Authentication is a first line of defense against intrusion. In the Authentication 

process the server verifies the identity of the client attempting to connect to 
the network. Unfamiliar clients would be denied access.

For  home users that will not incorporate a RADIUS server in their network, the security 
for the DI-724U, used in conjunction with other 802.11g products, will still be much 
stronger than ever before. Utilizing the Pre Shared Key mode of WPA, the DI-724U will 
obtain a new security key every time it connects to the 802.11g network. You only need 
to input your encryption information once in the configuration menu. No longer will you 
have to manually input a new WEP key frequently to ensure security, with the DI-724U, 
you will automatically receive a new key every time you connect, vastly increasing the 
safety of your communications. 

*  Maximum  wireless  signal  rate  derived  from  IEEE  Standard  802.11g  specifications.  Actual  data 
throughput will vary.  Network conditions and environmental factors, including volume of network traffic, 
building materials and construction, and network overhead lower actual data throughput rate. D-Link 
108G performance results are based on testing with other D-Link 108G enabled devices utilizing Packet 
Bursting, FastFrames, Turbo Mode and Compression techniques. Data already compressed may not 
benefit from the D-Link 108G compression techniques..

Summary of Contents for DI-724P






































































































Reviews: