D-Link DI-524UP Owner'S Manual Download Page 59

Page: 59 / 92

Tools > System

The

System

Settings

window has three basic functions for the DI-524UP administrator.

Configuration settings can be saved to a local hard drive on your computer by clicking
the

Save

button. This will produce a new window from your operating system inquiring

you about the location where you would like to save your files. The administrator may
also upload configuration settings saved to a local hard drive by entering the path into
the open field or by clicking the

Browse

button and searching for its location the

computer. Once found, click

Load

to upload these settings to the DI-524UP. The

administrator may also restore the router back to its default configurations by clicking
the

Restore

button.

Save

Click

Save

to save the current settings to the local

drive.

Browse / Load

Click

Browse

to find the settings, then click

Load

Restore

Click

Restore

to restore the factory default settings.

Reboot

Click

Reboot

to reboot the Router.

Summary of Contents for DI-524UP





























































































Search results

Summary of Contents for DI-524UP

Reviews:

Related manuals for DI-524UP

Brands by name

Popular brands

D-Link DI-524UP, Owner'S Manual

Search results

Summary of Contents for DI-524UP

Reviews:

Related manuals for DI-524UP

Brands by name

Popular brands