41
D-Link DHP-W307AV User Manual
Section 3 - Configuration
Save to Local
Hard Drive:
Upload from Local
Hard Drive:
Restore to Factory
Default:
Reboot the Device:
Use this option to save the current access point
configuration settings to a file on the computer you
are using. Click the
Save
button. You will then see
a file dialog where you can select a location and
file name for the settings.
Use this option to load previously saved access
point configuration settings. Click
Browse
to find a
previously saved configuration file. Then, click the
Upload Settings
button to transfer those settings
to the access point.
This option will restore all configuration settings
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you would like to save the current access point
configuration settings, use the
Save
button above.
Note:
Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Click to reboot the access point.
System
