13
D-Link DHP-W307AV User Manual
Section 2 - Installation
Powerline Network - Quick Setup
Simple Connection Button Usage
The Simple Connection Button is used to add a Powerline AV device to a Powerline network. You can allow a Powerline
AV device to join a network by pressing the Simple Connection Button to toggle it to the Broadcast state or Join state.
The Simple Connection Button has 3 different trigger states:
Broadcast state -
Enables a Powerline AV device to provide information for another Powerline AV device
to join its Powerline network (works even if it is the only device existing within the network group). The
first Powerline device will use this state when the Simple Connection Button is pressed.
Join state -
This allows an ungrouped Powerline AV device to join an existing Powerline network.
Powerline devices added after the first device will be in the Join State when the Simple Connection Button
is pressed.
Ungroup state -
Hold down the Simple Connection Button for more than 10 seconds to detach the device
from its network group.
