D-Link DHP-306AV User Manual Download Page 14

Page: 14 / 82

D-Link DHP-W307AV User Manual

Section 2 - Installation

Powerline Installation Considerations

Plan the location of your Powerline devices:

1. Connect Powerline devices to electrical outlets that are not controlled by a wall

switch to avoid accidentally turning off power to the device.

2. Do not connect the Powerline AV Ethernet Adapter to an extension cord, surge

protector, or power strip as this might prevent it from working correctly, or

reduce the network performance.

3. Avoid using the Powerline AV Ethernet Adapter in an electrical outlet that is

located near an appliance that uses a lot of power, such as a washer or dryer,

or a refrigerator. This may prevent the adapter from working correctly, or

negatively impact network performance.

4. Verify that your Powerline devices are electrically rated to operate with the power available in your location.

5. To help prevent against electrical shock, be sure to plug the power cables into properly grounded electrical

outlets.

6. The Powerline device is equipped with a three-pronged plug to help ensure proper grounding. Do not use adapter

plugs or remove the grounding prong from the cable.

Summary of Contents for DHP-306AV



















































































Search results

Summary of Contents for DHP-306AV

Reviews:

Related manuals for DHP-306AV

Brands by name

Popular brands

D-Link DHP-306AV, User Manual

Search results

Summary of Contents for DHP-306AV

Reviews:

Related manuals for DHP-306AV

Brands by name

Popular brands