D-Link DFL-700 - Security Appliance Manual Download Page 79

Page: 79 / 141

Users

Click on

Status

in the menu bar, and then click

Users

below it. A window will appear

providing user information.

Currently authenticated users

– users logged in using HTTP/HTTPS authentication,

users logged in on PPTP and L2TP servers will be listed here. Users can be forced to log out
by clicking logout.

Currently recognized privileges

– all users and groups that are used in policies are

listed here. These users and groups will be able to use HTTP and HTTPS authentication.

Interfaces where authentication are available

– here all interfaces where HTTP and

HTTPS authentication is possible is listed.

Summary of Contents for DFL-700 - Security Appliance














































































































































Search results

Summary of Contents for DFL-700 - Security Appliance

Reviews:

Related manuals for DFL-700 - Security Appliance

Brands by name

Popular brands

D-Link DFL-700 - Security Appliance, Manual

Search results

Summary of Contents for DFL-700 - Security Appliance

Reviews:

Related manuals for DFL-700 - Security Appliance

Brands by name

Popular brands