D-Link DFL-300 - Security Appliance User Manual Download Page 38

Page: 38 / 179

- 38 -

Enabling DHCP Support:

Step 1.

In the Dynamic IP Address window, click

Enable DHCP Support

Step 2.

Domain Name:

The Administrator may enter the name of the

Internal network domain if preferred.

Step 3.

Domain Name Server:

Enter in the IP address of the DNS Server

to be assigned to the Internal network.

Step 4.

Client IP Address Range 1:

Enter the starting and the ending IP

address dynamically assigning to DHCP clients.

Step 5.

Client IP Address Range 2:

Enter the starting and the ending IP

address dynamically assigning to DHCP clients. (Optional)

Step 6.

Click

to enable DHCP support.

Summary of Contents for DFL-300 - Security Appliance




















































































































































































Search results

Summary of Contents for DFL-300 - Security Appliance

Reviews:

Related manuals for DFL-300 - Security Appliance

Brands by name

Popular brands

D-Link DFL-300 - Security Appliance, User Manual

Search results

Summary of Contents for DFL-300 - Security Appliance

Reviews:

Related manuals for DFL-300 - Security Appliance

Brands by name

Popular brands