manualshive.com logo in svg

D-Link DFL-300 - Security Appliance, User Manual, Page: 23 / 179

Share
Download
D-Link DFL-300 - Security Appliance User Manual Download Page 23

- 23 - 

 

ping the Firewall.  

If set to enable, the FIREWALL VPN ROUTER will 

respond to echo request packets from the external network.

 

WebUI:

 Select this to allow the FIREWALL VPN ROUTER WEBUI to 

be accessed from the External (WAN) network.  This will allow the 
WebUI to be configured from a user on the Internet.  Keep in mind 
that the FIREWALL VPN ROUTER always requires a username and 
password to enter the WebUI.  

For Dynamic IP Address (Cable Modem User): 

This option is for users 

who are automatically assigned an IP address by their ISP, such as cable 

modem users.  The following fields apply: 

IP Address:

 The dynamic IP address obtained by the Firewall from 

the ISP will be displayed here.  This is the IP address of the External 

(WAN) port of the FIREWALL VPN ROUTER. 

MAC Address:

 This is the MAC Address of the FIREWALL VPN 

ROUTER. 

Hostname:

 This will be the name assign to the FIREWALL VPN 

ROUTER.  Some cable modem ISP assign a specific hostname in 

order to connect to their network.  Please enter the hostname here.  If 

not required by your ISP, you do not have to enter a hostname. 

Ping:

 Select this to allow the external network to ping the IP Address 

of the Firewall.  This will allow people from the Internet to be able to 

ping the Firewall.  

If set to enable, the FIREWALL VPN ROUTER will 

respond to echo request packets from the external network.

 

WebUI:

 Select this to allow the FIREWALL VPN ROUTER WEBUI to 

be accessed from the External (WAN) network.  This will allow the 

WebUI to be configured from a user on the Internet.  Keep in mind 

that the FIREWALL VPN ROUTER always requires a username and 

password to enter the WebUI. 
 

For Static IP Address:

 

This option is for users who are assigned a static IP 

Address from their ISP.  Your ISP will provide all the information needed for 
this section such as IP Address, Netmask, Gateway, and DNS.  Use this 
option also if you have more than one public IP Address assigned to you.  

IP Address:

  Enter the static IP address assigned to you by your ISP.  

This will be the public IP address of the External (WAN) port of the 
FIREWALL VPN ROUTER. 

Netmask:

  This will be the Netmask of the external (WAN) network. 

(i.e. 255.255.255.0) 

Default Gateway:

  This will be the Gateway IP address. 

Domain Name Server (DNS):

  This is the IP Address of the DNS 

Summary of Contents for DFL-300 - Security Appliance




















































































































































































Reviews:

No comments