manualshive.com logo in svg

D-Link DFL-300 - Security Appliance, User Manual, Page: 116 / 179

Share
Download
D-Link DFL-300 - Security Appliance User Manual Download Page 116

Autokey IKE 

This chapter describes steps to create a VPN connection using 

Autokey IKE

.  

Autokey IKE (Internet Key Exchange) provides a standard method to 
negotiate keys between two security gateways. For example, with two firewall 
devices, IKE allows new keys to be generated after a set amount of time has 
passed or a certain threshold of traffic has been exchanged. 

 

Accessing the Autokey IKE window: 

Click 

Autokey IKE

 under the VPN menu to enter the Autokey IKE window. 

The Autokey IKE table displays current configured VPNs. 

 

 

The fields in the Autokey IKE window are: 

 

Name:

 The VPN name to identify the VPN tunnel definition. The name 

must be different for the two sites creating the tunnel. 

 

Gateway IP:

 The external interface IP address of the remote Firewall. 

 

Destination Subnet:

 Destination network subnet. 

 

PSK/RSA:

 The IKE VPN must be defined with a Preshared Key. The Key 

may be up to 128 bytes long. 

 

Status:

 Connect/Disconnect or Connecting/Disconnecting. 

 

Configure:

 Connect, Disconnect, Modify and Delete. 

 

- 116 - 

 

Summary of Contents for DFL-300 - Security Appliance




















































































































































































Reviews:

No comments