Setup Guide
D-Link Corporation
Page - 14 -
Using the D-Link Graphing Utility
D-Link also provides a graphing utility to view detailed traffic statistics in real-time
graphs and reports. The graphing utility offers two types of graph formats. First, the
line graph is similar to the
Performance Monitor
in Windows NT and provides a
detailed histogram of throughput data in real-time. The second option provides for
real-time 3-D bar charts that provide throughput data for every component in a
server or all of the protocol traffic.
To launch the D-Link Graph Utility, follow the steps outlined below.
Step 1
Open the D-Link Load balancing software and select the Status Tab. See
Launching
the Load Balancing Utility
above.
Step 2
Select the
Graph Details
button in the middle of the Status Tab. The Graphing utility
should be displayed with three tabs:
Graph Setting, Protocol Stats, and Device Stats
.
Step 3
Select the Graph Setting tab and select the device you wish to graph from the Select
Device pull-down box located at the top of the tab. The following section explains
each option on the Graph Settings tab.
Graph Settings Tab
The “Graph Settings” tab allows you to customize how the software graphs and
displays throughput data, as well as select which device to graph throughput data
on. On this tab you can:
The Graph Utility provides detailed statistics and graphs.
