![D-Link DFE-570TX Setup Manual Download Page 8](http://html1.mh-extra.com/html/d-link/dfe-570tx/dfe-570tx_setup-manual_3171184008.webp)
Setup Guide
D-Link Corporation
Page - 8 -
The driver installs as Protocol Service in NT’s
Network Control Panel
Quick Setup Guide
Installing the Load Balancing Driver
Step 1
Insert diskette into floppy drive
or CD in the CD-ROM drive.
Step 2
Open Control Panel.
Step 3
Double-click on Networking.
Step 4
Click on Protocols tab.
Step 5
Select
Add..
to add a new
Protocol Service.
Step 6
Choose
Have Disk…
and the
path to the drive or directory containing the D-Link installation files.
Step 7
The option “Load Balancing and Failover
Software…” should appear. Select the
option and click
OK
.
Step 8
The Setup dialog should be displayed.
This dialog allows you to configure all of
the ports that you want to add to the
Array. Choose the first port in the
“Available Adapters” list at the top of the
dialog and select
Add...
Step 9
You will be prompted to give the new array a name. This dialog will appear the first
time only when you add an adapter to an array. If you will add more than one array,
you may want to give each array segment a name such as “Engineering” or
“Accounting."
Adding the D-Link Protocol Transport