D-Link DES-3526 - Switch - Stackable, Manual

Page: 195 / 258

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
182
Section 10
D-Link Single IP Management
Single IP Management (SIM) Overview
Topology
Firmware Upgrade
Configuration Backup/Restore
Single IP Management (SIM) Overview
Simply put, D-Link Single IP Management is a concept that will stack switches together over Ethernet
instead of using stacking ports or modules. There are some advantages in implementing the "Single IP
Management" feature:
1. SIM can simplify management of small workgroups or wiring closets while scaling the
network to handle increased bandwidth demand.
2. SIM can reduce the number of IP address needed in your network.
3. SIM can eliminate any specialized cables for stacking connectivity and remove the distance
barriers that typically limit your topology options when using other stacking technology.
Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following
rules:
•
SIM is an optional feature on the Switch and can easily be enabled or disabled through the Command Line
Interface or Web Interface. SIM grouping has no effect on the normal operation of the Switch in the user's
network.
•
There are three classifications for switches using SIM. The Commander Switch (CS) , which is the master
switch of the group, Member Switch (MS) , which is a switch that is recognized by the CS a member of a SIM
group, and a Candidate Switch (CaS) , which is a Switch that has a physical link to the SIM group but has not
been recognized by the CS as a member of the SIM group.
•
A SIM group can only have one Commander Switch (CS).
•
All switches in a particular SIM group must be in the same IP subnet (broadcast domain). Members of a SIM
group cannot cross a router.
•
A SIM group accepts up to 32 switches (numbered 0-31), including the Commander Switch (numbered 0).
There is no limit to the number of SIM groups in the same IP subnet (broadcast domain), however a
single switch can only belong to one group.
If multiple VLANs are configured, the SIM group will only utilize the default VLAN on any switch.
SIM allows intermediate devices that do not support SIM. This enables the user to manage switches
that are more than one hop away from the CS.
The SIM group is a group of switches that are managed as a single entity. The DES-3526 may take on
three different roles:
1. Commander Switch (CS) - This is a switch that has been manually configured as the
controlling device for a group, and takes on the following characteristics:
•
It has an IP Address.
•
It is not a command switch or member switch of another Single IP group.
•
It is connected to the member switches through its management VLAN.