D-Link DES-3526 - Switch - Stackable, Manual

Page: 119 / 258

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
106
TxPeriod [30 ] This sets the TxPeriod of time for the authenticator PAE state machine. This value
determines the period of an EAP Request/Identity packet transmitted to the client. The
default setting is
30 seconds.
QuietPeriod [60 ] This allows you to set the number of seconds that the Switch remains in the quiet
state following a failed authentication exchange with the client. The default setting is
60 seconds.
SuppTimeout [30 ] This value determines timeout conditions in the exchanges between the Authenticator
and the client. The default setting is
30 seconds.
ServerTimeout [30 ] This value determines timeout conditions in the exchanges between the Authenticator
and the authentication server. The default setting is
30 seconds.
MaxReq [2 ] The maximum number of times that the Switch will retransmit an EAP Request to the
client before it times out of the authentication sessions. The default setting is
2 .
ReAuthPeriod [3600] A constant that defines a nonzero number of seconds between periodic
reauthentication of the client. The default setting is
3600 seconds.
ReAuth <Disabled> Determines whether regular reauthentication will take place on this port. The default
setting is
Disabled .
Click Apply to implement your configuration changes. To view configurations for the 802.1X
Authenticator Settings on a port-by-port basis, see the 802.1X Authenticator Settings table.
PAE System Control
Existing 802.1x port settings are displayed and can be configured using the windows below.
Port Capability
Click Port Access Entity > PAE System Control > Port Capability to view the following window: