DES-3526 Layer 2 Fast Ethernet Switch
Command Parameters
config authen
server_host
<ipaddr> protocol [tacacs | xtacacs | | radius] {port <int 1-
65535> | key [<key_string 254> | none] | timeout <int 1-255> |
retransmit <int 1-255>}
delete authen
server_host
<ipaddr> protocol [tacacs | xtacacs | | radius]
show authen
server_host
config authen
parameter
response_timeout
<int 1-255>
config authen
parameter attempt
<int 1-255>
show authen
parameter
enable admin
config admin
local_enable
Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose
Used to enable system access authentication policy.
Syntax
enable authen_policy
Description
This command will enable an administrator-defined authentication
policy for users trying to access the Switch. When enabled, the
device will check the method list and choose a technique for user
authentication upon login.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable the system access authentication policy:
DES-3526:4#enable authen_policy
Command: enable authen_policy
Success.
DES-3526:4#
disable authen_policy
Purpose
Used to disable system access authentication policy.
180
