DES-3526 Layer 2 Fast Ethernet Switch
26
MAC N
OTIFICATION
C
OMMANDS
The MAC notification commands in the Command Line Interface (CLI) are listed, in the following table, along with their
appropriate parameters.
Command Parameters
disable mac_notification
config mac_notification
{interval <int 1-2147483647> | historysize <int 1-500>
config mac_notification
ports
[<portlist> | all] [enable | disable]
show mac_notification
show mac_notification
ports
enable mac_notification
<portlist>
Each command is listed, in detail, in the following sections.
enable mac_notification
Purpose
Used to enable global MAC address table notification on the
Switch.
enable mac_notification
Description
This command is used to enable MAC address notification without
changing configuration.
Parameters None.
Restrictions
Syntax
Only
administrator-level users can issue this command.
Example Usage:
To enable MAC notification without changing basic configuration:
DES-3526:4#
DES-3526:4#enable mac_notification
Command: enable mac_notification
Success.
disable mac_notification
Purpose
Used to disable global MAC address table notification on the Switch.
disable mac_notification
Syntax
173
