DES-3526 Layer 2 Fast Ethernet Switch
To create a link aggregation group:
DES-3526:4#create link_aggregation group_id 1
Command: create link_aggregation group_id 1
Success.
DES-3526:4#
delete link_aggregation group_id
Purpose
Used to delete a previously configured link aggregation group.
Syntax
delete link_aggregation group_id <value 1-6>
Description
This command is used to delete a previously configured link
aggregation group.
Parameters
<value 1-6>
−
Specifies the group ID. The Switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete link aggregation group:
DES-3526:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-3526:4#
config link_aggregation
Purpose
Used to configure a previously created link aggregation group.
Syntax
config link_aggregation group_id <value 1-6> {master_port
<port> | ports <portlist> | state [enable | disable]
Description
This command allows you to configure a link aggregation group that
was created with the
create link_aggregation
command above. The
DES-3526 supports link_aggregation cross box which specifies that
link aggregation groups may be spread over multiple switches in the
switching stack.
Parameters
group _id <value 1-6>
−
Specifies the group ID. The Switch allows up
to 6 link aggregation groups to be configured. The group number
identifies each of the groups.
118
