D-Link DES-3350SR, Reference Manual

Page: 221 / 486

DES-3350SR Layer 3 Gigabit Switch
217
show ospf area
Syntax
show ospf area {<area_id>}
Description This command will display the current OSPF area configuration.
Parameters
<area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
Restrictions None.
Usage Example
To display an OSPF area
’
s settings:
local>show ospf area
Command: show ospf area
Area ID Type Stub Import Summary LSA Stub Default Cost
-------------- ------------- ------------------------------------ ----------- --------
0.0.0.0 Normal None None None
10.48.74.122 Stub Enabled Enabled 1
Total Entries: 2
local>
create ospf host_route
Purpose Used to configure OSPF host route settings.
Syntax
create ospf host_route <ipaddr> {area <area_id> | metric <value
1-65535>}
Description This command is used to configure the OSPF host route settings.
Parameters
<ipaddr>
−
The host
’
s IP address.
<area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
metric <value 1-65535>
−
A metric between 1 and 65535, which will
be advertised.
Restrictions Only administrator-level users can issue this command.
Usage Example
To configure the OSPF host route settings: