DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
190
Link Aggregation Commands
show link_aggregation
Purpose
Used to display the current link aggregation
configuration on the switch.
Syntax
show link_aggregation {group_id
<value>/algorithm}
Description
This command will display the current link
aggregation configuration of the switch.
Parameters
<value>
−
Specifies the group id. The switch
allows up to 6 link aggregation groups to be
configured. The group number identifies each
of the groups.
algorithm
−
Allows you to specify the display
of link aggregation by the algorithm in use by
that group.
Restrictions none.
Example Usage:
DES3226S:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID : 1
Master Port : 2:17
Member Port : 1:5-1:10,2:17
Status : Disabled
Flooding Port : 1:5