DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
Switch Port Commands
59
show ports
Purpose
Used to display the current configuration of a
range of ports.
Syntax
show ports {<portlist>}
Description
This command is used to display the current
configuration of a range of ports.
Parameters
<portlist>
−
specifies a range of ports to be
configured. The port list is specified by listing
the lowest switch number and the beginning
port number on that switch, separated by a
colon. Then highest switch number, and the
highest port number of the range (also
separeted by a colon) are specified. The
beginning and end of the port list range are
seperated by a dash. For example,
1:3
would
specify switch number 1, port 3.
2:4
specifies
switch number 2, port 4.
1:3-2:4
specifies all
of the ports between switch 1, port 3 and
switch 2, port 4
−
in numerical order.
Restrictions none.
Example Usage:
To display the configuration of the ports 1-7 of module 1:
DES3226S:4#show ports 1:1-1:7
Port Port Settings Connection Address
State Speed/Duplex/FlowCtrl Speed/Duplex/FlowCtrl Learning
---- -------- --------------------- --------------------- --------
