D-Link DES-1228/ME User Manual Download Page 214

Page: 214 / 267

DES-1228/ME Layer 2 Fast Ethernet Managed Switch

201

The following fields can be viewed or set:

Parameter Description

VLAN Name

Enter a VLAN Name by which to browse the forwarding table.

MAC Address

Enter a MAC address by which to browse the forwarding table.

Port

Select the port by using the corresponding pull-down menu.

Find

Allows the user to move to a sector of the database corresponding to a user defined port,
VLAN, or MAC address.

VID

The VLAN ID of the VLAN of which the MAC address above corresponds.

MAC Address

The MAC address entered into the address table.

Port

The port to which the MAC address corresponds.

Type

Describes the method which the Switch discovered the MAC address. The possible entries
are Dynamic, Self, DeleteOnReset and Permanent.

Next

Click this button to view the next page of the address table.

View All Entry

Clicking this button will allow the user to view all entries of the address table.

Add to Static MAC-
address Table

This function will add the entry to the Static MAC-address table and change its

Type

Permanent

Summary of Contents for DES-1228/ME











































































































































































































































































Search results

Summary of Contents for DES-1228/ME

Reviews:

D-Link DES-1228/ME, User Manual, Page: 214 / 267

Search results

Summary of Contents for DES-1228/ME

Reviews: