D-Link DES-1228/ME User Manual Download Page 199

Page: 199 / 267

DES-1228/ME Layer 2 Fast Ethernet Managed Switch

186

Figure 11- 1. CPU Utilization graph

The window will automatically refresh with new updated statistics.

The information is described as follows:

Parameter Description

Time Interval

Select the desired setting between

and

60s

, where "s" stands for seconds. The default

value is one second.

Record Number

Select number of times the Switch will be polled between

and

200

. The default value is

200

Show/Hide

Check whether to display Five Secs, One Min, and/or Five Mins.

Clear

Clicking this button clears all statistics counters on this window.

Port Utilization

The

Port Utilization

page displays the percentage of the total available bandwidth being used on the port.

To view the port utilization, click

Monitoring

Port Utilization

Summary of Contents for DES-1228/ME











































































































































































































































































Search results

Summary of Contents for DES-1228/ME

Reviews:

D-Link DES-1228/ME, User Manual, Page: 199 / 267

Search results

Summary of Contents for DES-1228/ME

Reviews: