D-Link DES-1228/ME, User Manual, Page: 14 / 267

DES-1228/ME Layer 2 Fast Ethernet Managed Switch
2
7. RFC2674 for 802.1p
8. IEEE 802.1X MIB
•
IEEE 802.3x flow control in full duplex mode
•
IEEE 802.1p Priority Queues
•
IEEE 802.3u 100BASE-TX compliant
•
RS-232 DCE console port for Switch management
•
Provides parallel LED display for port status such as link/act, speed, etc.
•
IEEE 802.3 10BASE-T compliant
•
High performance switching engine performs forwarding and filtering at wire speed, maximum 14,881 packets/sec
on each 10Mbps Ethernet port, maximum 148,810 packet/sec on 100Mbps Fast Ethernet port and 1,488,100 for each
Gigabit port
•
Full and half-duplex for both 10Mbps and 100Mbps connections. Full duplex allows the switch port to
simultaneously transmit and receive data. It only works with connections to full-duplex-capable end stations and
switches. Connections to a hub must take place at half-duplex
•
Support Broadcast/Multicast storm control
•
Non-blocking store and forward switching scheme capability to support rate adaptation and protocol conversion
•
Supports by-port Egress/Ingress rate control
•
Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed