D-Link DES-1228/ME User Manual Download Page 204

Page: 204 / 267

DES-1228/ME Layer 2 Fast Ethernet Managed Switch

191

Figure 11- 6. Rx Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets)

The following fields may be set or viewed:

Parameter Description

Time Interval

Select the desired setting between

and

60s

, where "s" stands for seconds. The default

value is one second.

Record Number

Select number of times the Switch will be polled between

and

200

. The default value is

200

Unicast

Counts the total number of good packets that were received by a unicast address.

Multicast

Counts the total number of good packets that were received by a multicast address.

Broadcast

Counts the total number of good packets that were received by a broadcast address.

Show/Hide

Check whether or not to display Multicast, Broadcast, and Unicast Packets.

Clear

Clicking this button clears all statistics counters on this window.

View Table

Clicking this button instructs the Switch to display a table rather than a line graph.

View Line Chart

Clicking this button instructs the Switch to display a line graph rather than a table.

Summary of Contents for DES-1228/ME











































































































































































































































































Search results

Summary of Contents for DES-1228/ME

Reviews:

D-Link DES-1228/ME, User Manual, Page: 204 / 267

Search results

Summary of Contents for DES-1228/ME

Reviews: