31
D-Link DCS-932L User Manual
Section 4 - Web Configuration
SMTP Server
Address:
Sender e-mail
Address:
Receiver e-mail
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail server.
This is the e-mail address of the person sending the camera snapshots.
This is the e-mail address of the recipient.
If the SMTP server uses authentication, you must enter your user
name here.
This is the password that corresponds to your user name to connect
to the SMTP server.
This section allows you to configure the email notification settings for your camera.
For example, if you want to use Gmail by SSL-TLS for the e-mail notification, you can follow the
setup procedure as below:
Step 1
- Enter “smtp.gmail.com” in SMTP Server Address.
Step 2
- Change the SMTP server port number from 25 to
465
.
Step 3
- Enter your gmail E-mail address in Sender E-mail Address.
Step 4
- Enter the destination E-mail address in Receiver E-mail Address.
Step 5
- Enter the user name required to access the SMTP server.
Step 6
- Enter the password required to access the SMTP server.
Step 7
- Select
SSL-TLS
and then click
Save Settings
.
Step 8
- Click the
Test
button to send a test e-mail will be sent to the e-mail account listed above.
Note: You can also use
STARTTLS
which will use SMTP server port number
587
.
Note: If you want to use the Yahoo SMTP server, the SMTP server address will be different between each registered region. And it only supports the SMTP server
port number
465
for the
SSL-TLS
.
Summary of Contents for DCS-932L
Page 1: ...Version 1 0 11 04 2010 ...
