![background image](http://html.mh-extra.com/html/d-link/dcs-6115/dcs-6115_user-manual_77666041.webp)
41
D-Link DCS-6115 User Manual
Section 3: Configuration
Event Setup
Typically, when motion is detected, the DCS-6115 sends images to a FTP server or sends e-mail notifications. As shown in the illustration below,
an event can be triggered by various conditions, such as motion detection or system reboot. When an event is triggered, a specified action will be
performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP site.
Instructions for setting an Event begin on the next page. Proper setup enables your DCS-6115 to perform as expected when a trigger is activated.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action