34
D-Link DCS-6115 User Manual
Section 3: Configuration
Exposure
Mode:
Shutter:
Denoise:
Brightness:
Contrast:
Saturation:
Sharpness:
WDR Level:
3D filter:
Reset Default:
Mode
. Set the camera for
Indoor
,
Outdoor
, or
Night
environments. Select
Moving
to capture
moving objects. The
Low.Noise
option will create a
higher quality picture with less noise. You can also
create three different custom exposure modes.
The
Max.Gain
setting will allow you to control the
maximum amount of gain to apply to brighten the
picture.
Select a minimum and maximum value from the
drop-down menu.
This setting allows you to control the amount of
noise reduction that will be applied to the picture.
Select a value from the drop-down menu.
Adjust this setting to compensate for backlit
subjects.
Adjust this setting to alter the color intensity/
strength.
This setting controls the amount of coloration, from
grayscale to fully saturated.
Specify a value from zero to 128 to specify how
much sharpening to apply to the image.
Specify a value from zero to 10 to specify how much
WDR (Wide Dynamic Range) to apply to the image, or select None.
Setting this option to
Low
,
Medium
, or
High
will help to reduce image artifacts, and result in images with less blur when viewing
the camera during the night or in areas where there are low levels of light.
Click this button to reset the image to factory default settings.