manualshive.com logo in svg

D-Link DCS-6115, User Manual, Page: 22 / 63

Share
Download
D-Link DCS-6115 User Manual Download Page 22

22

D-Link DCS-6115 User Manual

Section 3: Configuration

Digital Input 

Indicator

This indicator will change color when a digital input signal is 

detected.

Motion Trigger 

Indicator

This indicator will change color when a trigger event occurs.

Note:

 

The video motion feature must be enabled.

Recording 

Indicator

 This indicator will change color when a recording is in progress.

Control Pad

This control pad can be used to electronically Pan, Tilt, and Zoom 

(ePTZ) within the camera's predefined view area, if one has been 

defined.

Auto Pan

This button starts the automatic panning function. The ROI will pan 

from back and forth within the FOV (field of view).

Stop

This button stops the camera's ePTZ motion.

Preset Path

This button starts the camera's motion along the predefined path.

Video Profile 1

Click to select a predefined setting (profile). Refer to 

page 35

 for 

configuration.

Video Profile 2

Click to select an alternate predefined setting (profile). Refer to 

page 35 

for configuration.

Full Screen Mode

Click to enlarge the video stream to full-screen.

Take a Snapshot

Click to record a snapshot of the current image.

Record Video Clip

Click to record a video clip, using predefined settings.

Set up Storage

Click to select a folder on your computer to save to.

Listen/Stop 

Listening

Click to enable or disable the ability to listen through the built-in 

microphone.

Talk/Stop Talking

Click to enable or disable the ability to speak through the built-in 

speaker.

Start/Stop Digital 

Output

Click to enable or disable the ability to use the built-in digital in/out 

port.

DCS-6115

Summary of Contents for DCS-6115
































































Reviews:

No comments