37
D-Link DCS-6112V /6113V User Manual
Configuration
*Day and Night Settings
* Day & night function for DCS-6113V only.
Switch to B/W in Night Mode:
Select to automatically enable the camera to
switch to B/W night mode.
IR Cut Filter:
The IR-Cut Removable (ICR) filter mechanically switches
between two different sensor filters. It provides the best light conditions both
during the day and night. The following options are:
• Auto Mode:
The camera automatically switches between day and night
mode by judging the level of ambient light. This mode is accessible only
when the exposure mode is set to Auto.
• Day Mode:
In this mode the camera switches on the IR cut filter at all
times, which will block the infrared light from reaching the sensor so that
the colors are not distorted.
• Night Mode:
The camera switches off the IR cut filter to allow the infrared
light to pass through. This helps the camera to see more clearly in low light
conditions.
• Synchronize with Digital Input:
The camera automatically removes the
IR cut filter when DI triggers.
• Schedule Mode:
The camera switches between day and night mode
based on a specific schedule. Ensure to enter the starting and ending time
for the day mode. Note that the time format is [hh:mm] and is expressed
in 24-hour clock time. By default, the starting time and ending time of day
mode are set to 07:00 and 18:00.
Light Sensor Sensitivity:
Select Low, Normal, or High sensitivity for the light
sensor.
Disable IR LED:
Select this box to disable the IR LED. The IR LED
automatically switches on at night. By default the LED automatically switches
on at night.
