23
D-Link DCS-5000L User Manual
Section 2 - Installation
Mounting Instructions
Place the mounting bracket where you want to position the camera and
use a pencil to mark the holes.
Use appropriate tools to drill two holes the same diameter as the plastic
anchors. After drilling the holes, insert the plastic anchors to support the
screws.
2
If desired, the power and Ethernet cables can be concealed behind
the mounting bracket. Run the cables through the back of the
mounting bracket, securing them with the built-in guides. Be
sure to leave enough cable length protruding from the top to
allow connection to the camera.
1
To mount your camera on a wall or ceiling, please follow the steps below.
It is suggested that you configure the camera before mounting.
3
