![background image](http://html.mh-extra.com/html/d-link/dcs-4703e/dcs-4703e_user-manual_77631042.webp)
42
D-Link DCS-4703E User Manual
Section 3: Configuration
Advanced
ICR and IR
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
Off:
On:
Sync with ICR:
Schedule:
The Day/Night mode is set automatically. You can use the
Sensitivity
drop-
down box to set when the camera will switch to Night mode. The text box
to the right shows what lighting conditions are currently being detected
by the camera for reference. You can refresh this status by clicking the
Refresh
button.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera will enter Day
mode at the starting time and return to Night mode at the ending time.
The camera can enable or disable the IR (infrared) light according to your
preferences. This setting provides additional controls depending on your
specific application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR filter is disabled (night mode).
The IR light will turn on or off according to the schedule that you specify
below.